• 1 min reading
  • 2026-10-25

NetCastPL4.0 present at the Smart Materials and Surfaces conference organized by SETCOR in Seville!

On October 21–23, the Smart Materials and Surfaces conference, organized by SETCOR, took place in Seville. The conference covered topics related to advanced materials and coatings with specialized properties, including applications in nanotechnology and medicine.

Karolina Bracka-Kęsek, PhD, Eng. presented a paper titled “The role of casting skin and section thickness in zinc coating formation on cast iron with added Ni”, which was carried out in collaboration with Jan Marosz, MSc, Eng., Prof. Marcin Górny, and Bogdan Cygan from Teksid Iron, Poland. The research was conducted and funded under the NETCASTPL project.

The presentation demonstrated the effect of the casting skin and machined surface on the formation of the zinc coating, taking into account the section thickness of the casting. The zinc coatings were produced on iron castings in a zinc bath at 450°C. Three types of substrates — varying in nickel content and section thickness (3 mm, 13 mm, and 55 mm) — were used to evaluate the influence of these factors on the thickness of the resulting alloy layer in the zinc coating.

The analysis of the results revealed that the most critical factors in the tested cases were the applied surface treatment and the section thickness, which determined the size and volume fraction of graphite precipitates in the microstructure.